Maintenance considerations for oil drilling machinery and equipment_Jiangsu Hengda Machinery Manufacturing Co.,Ltd

Maintenance considerations for oil drilling machinery and equipment

Published:

2020-03-23

Second, regularly check the equipment seal, once the equipment seal oil leakage, to timely shutdown, and the oil leakage will be sealed; in addition, to regularly check the connection of each connection firmware, such as loose, to timely reinforcement.

　　At present, China's oil drilling enterprise safety management is extremely strict, which is also for the sake of their own interests, oil enterprises are different from other industries, with difficult to manage, deal with emergencies slowly and other unique characteristics of their own, so in ordinary times we must do a good job of safety management, and an important factor in the safety management of oil enterprises is the management of mechanical equipment, only a good job of these mechanical equipment Only by doing a good job of safety management of these machinery and equipment can we guarantee the safety and smooth operation of other links. So how to do a good job of safety management of machinery and equipment? The first is to implement the safety equipment responsibility system within the enterprise, the use of relevant machinery and equipment to do a good job of registration, clear responsibilities of each employee and each department, once the equipment failure, to be able to find the person in charge; second is the preparation of safety operation manual, to strengthen the operator's awareness of safe operation; then the operator is required to be familiar with the technical performance of the equipment operated and the structural principle, and also clear some simple equipment. At the same time, they should also be clear about the handling of some simple failures of the equipment. Only by doing the above can we achieve safe management and safe production of machinery and equipment.
　　Specific measures to strengthen the maintenance of oil drilling machinery and equipment
　　First, in the daily maintenance, we should pay attention to keep the mechanical petroleum machinery and equipment is dry, these devices in the usual use of the process, will inevitably cause some sediment left behind, the legacy of these substances will increase the wear and tear during the operation of the equipment, resulting in equipment loss; at the same time, we should always observe the bearing equipment and friction parts of the equipment, as well as the gear box and hydraulic oil tank temperature rise and fall, the temperature of each part should not Higher than 70 ℃, once the temperature is higher than this temperature, the equipment should be shut down to reduce the temperature, and to find the cause of the problem in a timely manner; In addition, in the daily use of machinery and equipment, pay attention to listen to the equipment in the process of abnormal sound, once there is some abnormal sound, most of the equipment is a problem, we must stop to check and repair.
　　Second, regularly check the equipment seal, once the equipment seal oil leakage, to timely shutdown, and the oil leakage will be sealed; in addition, to regularly check the connection of each connection firmware, such as loose, to timely reinforcement.
　　Third, to regularly check the performance of the hoses, these hoses in the work of a period of time, there will be dry cracking and bagging phenomenon, when this situation should be timely replacement of these hoses, often check the oil tank oil has not deteriorated, and timely add hydraulic oil. At the same time, the hydraulic system should be checked frequently. When the cartridge pointer points to the red zone, proving that the cartridge has been blocked, should immediately stop, replace the cartridge, so as not to damage the oil pump or motor. In addition, when the pressure gauge fails, it should be replaced in time.
　　The management and maintenance of oil drilling equipment is extremely important for oil enterprises, it is related to whether the oil enterprise can work properly, for the management and maintenance of these equipment to fully take into account the actual characteristics of the oil enterprise, at the same time to fully implement the relevant management norms, strengthen the equipment operation and management personnel information communication and feedback, in ordinary times to do a good job of supervision and inspection, this supervision and inspection norms into the daily management of the enterprise Inspection norms into the daily management of enterprises, and gradually form a system, only in this way can make our oil companies get a healthy development.